Crystal Quest Single 6 Stage Fluoride Countertop Water Filter

Home : Fluoride Water Filters : Crystal Quest Single 6 Stage Fluoride Countertop Water Filter

If you are looking to remove fluoride, lead and hundreds of other contaminants from your drinking water then the Crystal Quest 6 stage Fluoride and Lead water filter is what you need. There are 6 stages of filtration for great tasting contaminant free water, Filtering capacity is on average 1000 gal.

1st and 6th stage water flows through a pre and post one micron filter pads to remove suspended particles like silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt and any other un-dissolved matter.

The 2nd stage water flows through a fine-mesh pre-resin media to reduce fluorides below 0.5 ppm. That contains synthetic aluminum oxide absorbent media, specifically designed to have a high affinity for fluoride, Lead and Arsenic. Read more on fluoride and lead removal media

3rd and 4th stage water flow through a KDF 55 and KDF 85 media to remove or reduce chlorine and heavy metals like lead, mercury, copper, nickel, chromium, cadmium, aluminum and other dissolved metals. Read more about KDF 55 and KDF 85

In stage 5 water flows through granulated coconut shell activated carbon to remove chlorine, (THM’s benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC’s) PCB’s, MTBE’s and hundreds of other chemical contaminants the might be in your drinking water causing bad taste and odors. Read more about coconut shell carbon

Capacity is up to 6,000 ppm with effluent levels below 0.2 ppm from 10 ppm feed. Note: high pH and high bicarbonate levels reduce capacity - above 100 ppm bicarbonate, reduction by 50%; above 200 ppm, reduction by 75%.

Benefits of the Crystal Quest single 6 stage countertop fluoride and lead water filter