Multipure Aquacomplete MP750 Plus RO - Reverse Osmosis Filter System

On sale add to cart and enter coupon code MultiPure to see sale price

Multipure Independent Distributor, ID # 424553

SORRY WE CANNOT SHIP THESE TO A ADDRESS THAT IS TO A SHIPPING CENTER TO BE SHIPPED OUT OF COUNTRY

Our Model Aquacomplete MP750 Plus RO combines Multipure’s renowned carbon block filter technology with the reverse osmosis technology, making it the most technologically advanced System in the world today. The Multipure MP750 Plus RO is the only device certified under NSF/ANSI Standards 42, 53, and 58 to reduce: Nitrates/Nitrate, Arsenic V, Chloramine, PCBs, Toxaphene, Chlordane, Lead, Mercury, etc.

The Multipure MP750PlusRO Unit is easy to install and simple to operate. It uses no electricity and the impurities removed through the reverse osmosis process are flushed down the drain. The pre-filter component provides 5 micron filtration to remove large particulate matter and extend the life of the reverse osmosis membrane. The reverse osmosis component reduces the level of Total Dissolved Solids (TDS), rust, dirt scale, and organic tastes and odors. The processed water is conveniently stored in a 3 gallon pressurized tank which is small enough to fit neatly under your sink.

Multi-Pure's MP750PlusRO Unit includes pre-filter, RO membrane, and Multipure’s Model MP750SB as a post-filter, giving you the highest quality water possible.


Multipure’s MP750 Plus Reverse Osmosis System features
FIVE Stages of filtration giving you performance that no
other device can provide. By combining Multipure’s superior
carbon block filter technology with state-of-the-art reverse
osmosis, you will receive the highest quality drinking water
possible. Here’s how it works:

Stage 1: The Sediment Pre-Filter screens out particles down
to 5 microns, improving the appearance of your water.
Recommended filter change (Model No. CBC110): approximately
every 6 months.

Stage 2 & Stage 3: Carbon Block Pre-Filters -- next, water
passes through two 5 micron Carbon Block Pre-Filters that
ensure that chlorine and other materials that cause your water
to taste and smell bad are reduced. Recommended filter
change (Model No. CBC112): approximately every 6 months.

Stage 4: The RO Membrane is a high-production, 50 gpd,
thin film composite semipermeable membrane that separates
unwanted inorganic impurities, such as nitrates, fluoride, etc.
from your water. This hyperfiltration membrane reduces salts,
certain heavy metals, and other impurities, giving you great
tasting water. Recommended membrane change (Model No.
CB-ROM): approximately every 2 years.

Stage 5: The Carbon Block Post-Filter, the final stage of the
water treatment process, provides the most efficient contaminant
removal possible. Multipure’s densely compacted carbon
block filter mechanically intercepts particles as small as
0.5 micron (sub micron) as well as electrokinectically
adsorbs particles by attracting the negative ions of certain
contaminants. In addition, the carbon block filter has a large
surface area for chemical/physical adsorption to take place,
reducing many different organic chemicals, pesticides, herbicides
and certain heavy metals. Recommended filter change
(Model No. CB6): approximately once a year.

Multipure’s MP750 Plus Reverse Osmosis System delivers
safe, deliciously clear drinking water that is convenient and
affordable.